From the moment Seth woke up this morning he talked about nothing but building a base. I do understand his excitement though more than most people. I used to build a base pretty much every week when i was younger. A lot of the time it was just a sloppy 'throwing a sheet off the top bunk and hanging it over the side', but sometimes i would really put the effort in. I used to pretend i was on a space ship or sometimes i was a pirate. Id love to be able to watch myself back then, i was usually on my own so it would be so interesting to see what my role play was like.
Luckily Seth doesn't have that problem as he has an amazing playmate, a young man who is educated in both pirating (is that a word?) and Space travel.
Well we cleared the floor in Seth's room and began our epic build. Its amazing what you can do with garden canes, electrical tape, Clothes pegs, 2 curtains and a duvet cover.
It did end up taking up a lot of Seth's floor space which i know Mrs M wasn't very happy about as she said the room looked messy but who cares when you've got an awesome base to play in. Seth decided to add the play tunnel to the door, which apart from taking up even more floor space looked great and made getting in a lot more fun. Not that i can fit my chunky body down there.
Opeie got really excited which resulted in the cover being pulled down a few times but once the initial excitement was over it stayed in one piece. Seth decided that he wanted to take in his Batman imaginext to play with (No surprise there!). Apparently the base was the Batcave and the play tunnel was the exit for the Batplane and the Batmobile. What was really cute was that every time Seth wanted to leave the Batcave he crawled down the play tunnel with the Vehicle. Adorable!
Once
it started to go dark i added Seth's fairy lights which was great and
Seth really enjoyed playing in the dark (plus in Gotham, night time is
when the Villains come out to play). We finally got to make good use of the
Batlight on the Batcave.
Just
before bedtime me and Opeie went in there to play. Opeie was exhausted
so decided that he just wanted a cuddle which was really nice, he lay on
my chest and i stroked his hair. He lay there with Cyborg in his hand
and wouldn't let him go. Although obviously being very relaxed he didn't
fall asleep, well not until mommy came looking for us because she
didn't know where we had disappeared to, joined us and gave him a feed.
That sent him straight off.
I'm pretty sure we will be in there first thing tomorrow playing Batman it's Seth's new favourite place to be. You can't beat a good base. After all Batman would be lost without his beloved Batcave.
Back in 2014 on the build up to Christmas, me and the boys embarked on big build LEGO adventure, when we decided to build a festive version of the iconic LEGO Deathstar. The build came out better than we had imagined and has really surprised me that so many people have been talking about it over the years. Its great when we are chatting with people at LEGO events and the boys drop in "we built the Christmas Deathstar". Especially for the amount of times that whoever we have been talking too has said 'wow that was you guys? I've seen that' (or words to that effect). The boys love that something we have built has been seen all over the world.
Since then the Deathstar has been sitting on a shelf in their bedroom collecting dust. It came down occasionally to be played with but the boys are builders and they love creating new things. Whenever I went in to their room, I always felt like our creation wasn't getting the love it deserved and I desperately wanted it on display in the house. I toyed with all sorts of display case ideas but it wasn't until I got chatting to a very good friend of mine over at 3rd Dim3nsion Arcades that ideas started to take shape.
Steve has become an amazing friend over the last few years and it all started with a chance meeting in a toy store. I can't even begin to explain how awesome it is to have someone who lives around the corner to talk all things geek with and although I love all the crazy ideas and creations I come up with, with the boys, Sometimes its great to have another adult to go over ideas with, especially as some of Steve's creative ideas blow my mind. So.... last year Steve designed and built something AMAZING for his friends 40th birthday which got me thinking about my display case predicament and as we chatted about it one night, we were bouncing ideas off of each other and we were both getting very excited about a possible joint build, combining Steve's creative flair with power tools and electronics and my love of LEGO.
Recently, after some time putting it off (due to all manner of reasons getting in our way) we decided to just go for it and the last few weeks have been hectic to say the least. Our idea was to combine LEGO's classic bricks (which take up so much of my time), with the digital side of this awesome company. Creating something completely different to anything else in the past, while displaying that dusty Deathstar too, restoring it to its former glory. The plan was to build a LEGO arcade machine which played all of the LEGO games that me and the boys love, but unlike any other machine that we have seen. Both myself and Steve are gaming fans and the Lego games have been really important to me especially as they have been something that have been played with the boys for years.
Tt's LEGO games fun started with Seth when Mrs M Was ill in hospital carrying Opeie. We would sit around the Hospital grounds, under a weeping willow outside her room between visiting hours playing LEGO Starwars on our DS'. It was a really tough time for everyone but it took the edge of the worry and was great father/son bonding for me and Seth
So this was going to be a fully customised and creative build, including a lot of things that were personal to our family.
When the build started there wasn't much I could do, Steve is one of those guys that seems to know how to do EVERYTHING! If he gets stuck on anything he does the research and makes sure he knows what he is doing. He is a whizz with electronics and woodwork and he got stuck in to the wood casing of the machine while I put my feet up and thought about the LEGO side of things. At first the plan was to make the entire thing personal to Me, Mrs M and the boys but as I started playing with the LEGO and coming up with ideas I started swaying towards a celebration of Tt games and the themes that we love the most, without of course losing that personal touch that me and the boys have in all of our builds.
With the casing built, Steve moved on to the computer side of things. We had purchased every PC LEGO game that we could find and I was surprised at just how many there were, quite a few I'd not heard of before. While Steve was busy working his magic with the wiring I measured up and began what turned out to be an amazing few weeks of Lego creating.
The plan was to have the PC and all of the electrics in the upper half of the machine freeing up the base to have the Deathstar inside and spinning. I thought that was going to take some time to work out but Steve had it suspended and spinning in no time, using a plastic pipe threaded through the centre of the build attached to a motor, genius!
Although it looked awesome spinning there, below looked pretty sparse so I decided to build a miniature Hoth scene below. Its important to know that I have a lot of respect for the designers at LEGO and I wanted to show that in some of the pieces I created for the arcade I wanted to use some of my favorite parts and designs from kits I love. For the Hoth scene it was all about the Microfighters, the AT-AT especially as despite being small it was one of my favorite builds from last year. I also used the Micro figures from the Battle of Hoth LEGO game which were a great addition to the lower area.
In keeping with the Christmas Deathstar theme, the AT-AT and a Tie fighter also received a festive makeover for the under section of the build.
The arcade machine was designed to completely showcase LEGO as the most amazing toy on the market and while I was busy designing panels and scenes for different areas Steve cut out large sections of the side panels for a great idea he had for displaying a minifigure collection. This gave Steve a chance to get out part of his minifigure series collection for photos. The series figures look amazing in the sides because of the variety of different figures. Using the Sides for more LEGO was a really interesting touch as it gave the machine more character where there would have typically been artwork. Steve also very kindly ordered some custom made signs from Lazer frame to finish of the panels
I'm a super hero geek through and through and the Tt Marvel and DC games have given me and the boys hours of fun family time together so it was only right that the main area of the machine, the part that would be viewed the most while playing, was built around both the Marvel and DC universe. A while back Mrs M had brought me the Daily bugle kit. It was a great build but inevitably ended up mixed into our LEGO to go towards future builds. I always thought this was a shame but that's how LEGO is in our house. I spotted the J Jonah Jameson stickered screen in a box one afternoon and thought how great it would be to have the Daily Bugle built along side the screen, with office workers looking distressed because clearly I was going to include a barrage of Marvel Villains.
With the Marvel side of things taken care of it was time to come up with an idea for the right hand side of the screen. We had quite a few DC villains in our collection which we wanted to use and we had previously built some Joker creations such as the Joker ice cream parlour a year or so ago. With the Daily Bugle side being heavy on the beige I wanted the other side of the screen to be as colourful as possible. To start with I had planned to create Jokers fun house, including all of the other baddies in our collection. I built two joker style doorways but then found myself building the next layer in green to try and create Jokers hair, that soon changed course though when I tried to use leaves for the Jokers eyebrows and found myself building a second level in the style of poison ivy, using leaves, vines and all the LEGO shrubbery I could find. That's what I love about LEGO, just handling the bricks sparks all sorts of building creativity.
Mr freeze claimed the next level which gave me the chance to use parts from Elsa's Frozen palace that had been sitting on a shelf, followed by Penguin, Riddler and a cat shaped rooftop fit for Catwoman. Making accessories for this section of the build was so much fun and the boys got involved too. Seth made some mini penguins and Opeie helped with Poison Ivy adding in Robin hanging from vines which I thought was a lovely touch.
There was still plenty of room left for building, especially around the controls area. Our original plan was to create some artwork to cover that whole area but after measuring the space we had Steve came up with the great idea to purchase a couple of large base plates, cut to shape and use that area for the boys to build on as they are playing. In the meantime though there was room for me to build a couple of larger sized villains. We had bought the Rhino and Sandman super villain team up kit a while back and apart from the minifigures the kit had been sitting in a box. I had been wanting to do something with Sandman for quite some time and this was my chance. Using various plates I created a sand spill and built him up changing into his sand form with a giant hand. This sort of creative, freestyle building is what LEGO is all about for me and using one piece at a time with no design is how I have always built.
I'd just like to say here that while I was in my element at this point building with those much loved bricks, Steve was grafting hard every night wiring up the system, adding lighting to all areas (which changes to a great selection of colours via remote) and creating some amazing menus and extra's. I wish I could write more about what he was doing in detail but I looked inside of the back of the machine one day and I kept thinking to myself "all hose wires look like a bowl of noodles". I honestly wouldn't have a clue where to start, the man is a genius! Pretty much all of this building was done from his kitchen, which probably wasn't much fun for his wife but she let him get on with it, thats love.
So with Sandman built we needed a super sized DC baddie to fill up some of the grey base plate and after chatting with Steve one night we decided that Clayface was going to be the most obvious choice. That night I left Steve's, grabbed the brown LEGO (It is stored in colour order at home), turned on the Avengers (because a good Super hero movie always gets me in the zone) and spent an hour building an evil looking blob of clay with a giant hand. Steve had a car sitting around his house from what I think was a Superman kit so I decided to make use of it and have Clayface holding it with a distressed looking civilian in the driving seat.
I dread to think how many messages me and Steve sent to each other over the course of this build. We were both so in to what we were doing that every time we finished a part (no matter how small) we sent a celebratory photo. At times I would chuckle to myself about about how nerdy we both were but we were creating something we thought was amazing and having a team mate to share the excitement of the development with really made the team experience. I was building most nights until late which was exhausting and Steve was at one point working night shifts, sleeping briefly and then wiring all the way up until his next shift, we were a team possessed by the finished piece.
The upper part of the machine where the name of the game would typically be was causing me some concern as I had no idea what I wanted to do with it. After another spit balling session though we decided I should make a Gifts from the Pirates sign using (of course) Lego and have a big 'ARCADE' next to it. Steve picked up some lights to illuminate the sign and asked if I could create something with Lego to make them look a bit more fun but I didn't have much space to play with because of the glass panel so what ever I came up with needed to be quite simple. I spent ages trying to work these out and it was driving me insane until I spotted some large wheels in our LEGO wheel box and thought 'those tires will fit on that light'. I love a good eureka moment like that and within minutes there were lighting rigs with control panels built. A great, yet simple touch.
The only thing left to complete on the Logo section of the machine was the two creators in their LEGO forms. In the words of Warwick Davis when we were at the Golden Brickies "When you are immortalised in LEGO there is nowhere else to go, that's it! My life is complete"
So, by this point in the build we had reached last Thursday. The software was complete and all of the LEGO I had created so far was attached and the machine was looking amazing. Steve's minifigure collection was beautifully displayed on the sides after Steve's hours of painstaking gluing of black bricks perfectly spaced out to give us a clean and tidy finish. To do this we sat down and measured the areas we needed to fill and I went home and made a rig that we could use with gaps to hold the bricks perfectly as they were being stuck.
I was shocked that Steve had finished the software when he did but was more shocked to find out when I arrived at his house that day that he had created two extra (and very clever) additions to an already awesome creation. Using a few LEGO bricks and some wire he had created a switch that could power up the whole machine. To look at it didn't seem like much but this was by far my favorite part of the entire build because it gave me the chance again to let my creative juices run wild. Thanks to this creative little piece I managed to build An on/off switch that looks like a Jack in a box, this was some serious teamwork.
Steve also handed me a 2x10 base plate that had been cut to fit 2x USB ports and Headphones and Mic Ports. Ive said it before and Ill say it again, the guy's a genius. It didn't fit into the build looking how it did but after 15 minutes of tinkering I managed to turn it into a newspaper stand to sit at the base of the Daily Bugle. Thursday evening the arcade was transported from Steve's house to my house, (thanks to my awesome neighbor Rikki), giving me one evening to work on the final piece between the screen and the control area starting last night. Typical that last night I was drawing a blank and I felt like the creativity had run out. I wasted a good two hours trying to figure out how to lay base plates against a really awkward angle. I was fed up until I thought about a conversation me and Steve had had a week or so before about LEGO's modular kits. Could I make the mid section look like a row of shops with the sand and clay creeping up? Yes I could is the answer to that question and at 3am that following morning I had completed it, hurrah.
One of the last things to add in to the build was of course ourselves. We've been in pretty much all of our builds and most of our LEGO kit reviews, fighting bad guys and getting up to all sorts of mischief, so it was important to be a part of this too. I had Mrs M as the damsel in distress, hanging from Venom's webs but she informed me that that was sexist, so I became the damsel while she concentrated on battling Sandman. When Seth was younger and I read to him before bed he loved a series of books we had called Spidey's Special Helpers. In each story Spider-man would get the help of two children to defeat whichever villain he was trying to stop. In the Sandman book the children help to defeat Sandman by using a vacuum so I thought it would be fun to sit and build a Vacuum with Seth and have his character trying to suck him up. Opeie made it clear he wanted to be fighting Clayface with a water hose so we made that happen too...
My friend Chris was visiting the following day and I had asked him if he wouldn't mind photographing the machine as he knew his way around a camera being a photographer. Ive always used my phone in the past as it is great for getting into smaller areas for close up shots but with the size of the machine I thought I definitely needed someone pro for the full length shots. After going to bed at 3am and then getting up with Opeie at 7:30am I was exhausted so you can imagine the stress on top of that when I powered the unit up and was greeted by a horrible crackly sound that was like something blowing and a dead machine! Aaaaarrrrggggghhhhhh!!!! I was straight on the phone to Steve and he was straight round to rectify the situation. I would love to have built this machine with brand new parts but we were on a budget so everything we used was second hand and if I am honest the parts could definitely do with being a little more up to date for smother play, we had to change the graphics card 3 times and the PC itself could really do with an upgrade but we worked with what we had. Hopefully we can change to up to date parts at a later date.
As I was taking pictures earlier I realised we were missing something really obvious in the build, I did say 'celebration of Tt games' after all. We had spoken about me including the Logo somewhere and it had slipped my mind, so this afternoon I took care of that...
So that's it! What started off as a conversation between two friends over a cup of tea about the display options for a custom LEGO kit, actually turned in to what I think is a pretty amazing machine and that is the magic of LEGO. Not only did those amazing bricks help to creative something unique and visually appealing but it also made me realise that as a team me and that tag team partner of mine Steve can achieve anything we put our mind to.
Having Seth as my Lego right hand man makes building so much more interesting. I love hearing his ideas, seeing what hidden details he comes up with and seeing the look of excitement on his face when we are discussing our construction. When we are planning a bigger build I like to get Seth to draw a sketch of the plans to work from, it's one of my favourite parts of the build.
Back at Easter I wrote a post about our Lego Easter hunt, rather than bombard the boys with chocolate I bought the Lego Deadpool kit and seperated it between empty plastic eggs. It was something they really wanted and personally I'd rather get them something like that than uneccessary amounts of chocolate. The kit spurred on our next big build and Seth got sketching straight away, designing the schematics of the building.
Once Seth had fully explained his vision we got to work, putting together a large base plate and the front fascia first. We always tend to start with the front as it gives us a good idea of how big the thing is going to be. We built this in a similar style to the Joker ice Cream parlour that we built last year because having the big open top area is great for the boys when playing.
Seth wanted the fascia to look like the head of the Lego Deadpool minifigure but with a drawbridge style door and a hidden entrance in the neck, a great start to our build. The idea was to build Deadpools armoury. A haven for badguys to get hold if all the weapons they need for whatever badness they are unleashing on Super Hero City.
Dr Octopus was the most likely choice for sales assistant due to all those arms. Seth designed a weapon cabinet for behind the till and wanted cupboards with drawers in for weapon storage.
To the rear of our creation and the more fun part to build was Deadpools living quaters. Seth had so many great ideas for this part of the build that shamefully we had to miss a couple of the things out because of lack of room. Apparently Deadpool needed an area that he could keep an eye on his shop as we all know bad guys can't be trusted.
This section of the build was where Seth let his creative juices run wild. It all started at the rear of the build and with Deadpools bedroom. Seth wanted it to look like a normal bedroom but with a couple of hidden doors into other sections of the build.
My favourite part of the build is the bed, Seth knew exactly what he wanted and came up with an genius way to make that happen. He remembered the bed from his very first Lego kit a few years back, the Lego city police station. the bed in the cell raised up and underneath there was a crowbar hidden ready for a little prison break. Seth wanted to make something similar but instead of a hidden item, an entire hidden room, a base of Operations for his beloved minifigure. I was tinkering around with lego ladders and stairs trying to make them fit when Seth handed me a much more interesting idea that he had made himself.
As part of the bedroom Seth also wanted to add in a sliding bookcase for a quick getaway.
the next room over from the bedroom is the kitchen/lounging area and a way for Deadpool to keep an eye on his business.
And then next door to that, something Seth adds in to every building that we build, toilets. This time his and hers matching toilets
And with each Lego toilet that we build, they also come with trap doors into jail cells below.
Of course its always the Super hero girlfriends that get caught and locked up. Poor Pepper Potts and Mary Jane Watson left to live out their days in a holding cell. Luckily Seth being the gentleman that he is added an escape hatch in to the build...
The boys were close by though and with a quick costume change they were off to save their ladies..
Seth made sure that there was a garage in the build as he told me how important it is to always have a get away vehicle close by when you are a baddie.
With all the illegal goings on happening within the shop it was obvious that eventually things would start to get out of hand, especially seeing as Dr Octopus left the gun cabinet unattended..
Luckily in Super hero City wherever theres a villian there are heroes just around the corner waiting to do what they do best...
We had so much fun building this and it has already spurred on another big idea which i think we will start building soon, I'm going to need to get Seth sketching his ideas first. The great thing about this build is that it is so strong and the boys can happily play out their stories without fear of it falling apart. Lets just hope Seth doesn't fall on this one like the great Jokers Lego Ice Cream Parlour disaster of 2013.
And when we had finished with our characters we had built a storage box on top of the fascia to put all our minifigures away (yes when it comes to Lego we think of everything).
